2024 DT Swiss Spares for sale Page 2

UK DT Swiss Spares

• 
  £469.49

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTHX153002R Bike Parts, Standard, 29 inch x 30 mm front

  #WHDTHX153002R

  DT Swiss HX 1501 Hybrid wheel, 30 mm rim, 12 x 148 mm boost axle, 29 inch rear A mountain bike must be fun uphill and downhill. This is exactly what you get with the HX 1501 SPLINE One. Since eMTBs allow the rider to pack many mountains into one exit, reliability and weight is critical. The HX 1501 SPLINE One meets both requirements. Thanks to its unsurpassed know-how in the manufacture of wheel components and industry-leading testing procedures, DT Swiss is able to specify its wheels in such a way that they are precisely matched to the area of application. Your job is to just to ride up and down the mountains. HYBRID hubsHybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke mounts. They are also equipped with new 24T hardened steel ratchets, oversized bearings and steel rotors. Thanks to these clever optimisations, DT Swiss achieves a permissible system weight of 150 kg with only minimal weight increase compared to a standard MTB hub. The result is a jewel of a hub that can cope with the highest torques, offers direct drive and combined with the other HYBRID components results in extremely robust wheels. 24t ratchetshardened 24T steel ratchets provide ultimate durability, have a small contact angle and thus guarantee a crisp riding feel. Oversized bearingsAll ball bearings in the hubs are oversized to withstand the high loads and to run perfectly under the hardest conditions. Steel rotorsTo cope with the high torques generated by modern eMTB drives, all hybrid freewheel bodies are made of steel. Available in both Shimano and SRAM XD versions, they are an extremely durable receptacle for any cassette. HYBRID spokesTo complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fit perfectly with the.

• 
  £231.42

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTE173003F Bike Parts, Standard, 27.5 inch x 30 mm front

  #WHDTE173003F

  DT Swiss E 1700 wheel, 30 mm rim, 15 x 110 m boost axle, 27. 5 inch front When the trails are stony and the roots are thicker than your legs, then look to the E 1700 SPLINE 30. Combined with a 2. 5 tyre it produces so much grip that you can tackle even the worst sections. The wheel construction with reduced competition spokes in the most stable straight pull design is based on DT Swiss's reliable and lightweight Ratchet System hubs. Exactly what an Enduro rider wants: robust enough for any trail, light enough to get there. Construction: Front Additional Information: - ASTM classification 4 - Freewheel system: Ratchet System 18 Intended use: MTB Axle system: Front wheel 15x110 mm Axle standard: Thru axle Front Hub Axle Diameter Front (mm): 15 mm Installation Width (mm): 110 mm Type: 350 Rims Profile Height: Low (

• 
  £142.84

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTE1801F Bike Parts, Standard, Front-23 mm Aluminium Clincher

  #DT-3654

  DT Swiss E 1800 spline disc brake Wheel, clincher 23 x 20 mm, front How can you make the most of your racing bike Just add the right tyres to your E 1800 SPLINE 23 wheels and off you go. On the way to work in the morning, hitting the hills in your lunch break and riding gravel roads in the evening - these wheels are with you - helping you to get the full potential out of your bike. Construction: Front Additional Information: - ASTM Classification 2 - Freewheel system: 3 pawl Intended use: Road Axle system: Front wheel 12x100 mm Axle standard: Thru axle Front Hub Axle Diameter Front (mm): 12 mm With thru axle Installation Width (mm): 100 mm Ball Bearing Type: 370 Sealed Rims Material: Aluminium System: Hollow chamber Size (In Inches): 28 Inch Width: 24 mm ETRTO (Width x Diameter): 20 - 622 mm Profile Height: Low (

• 
  £173.53

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTP1801R Bike Parts, Standard, Rear-23 mm Aluminium Clincher

  #WHDTP1801R

  DT Swiss P 1800 SPLINE wheel, clincher 23 x 18 mm, rear Seven days a week, 365 days a year, whether the sun is shining or the rain has wets you to the bones. You live for days spent on your bike. The guys from DT Swiss know how you feel - and that's why they offer you the P 1800 SPLINE wheels. Carefree riding for a life in the saddle. The P 1800 SPLINE 23 is the prototype of a modern wheel. A wide yet lightweight aluminium rim provides the basis for an excellent STW value (stiffness - weight - ratio). The high-quality hub with the proven 3-plug system and the unique DT Swiss aero spokes provide the components for a reliable, durable wheel. The perfect companion in training and always ready for more. Intended use: Road Construction: Rear Axle system: Rear Wheel 5x130 mm Additional Information: - ASTM Classification: 1 Axle standard: Quick release Rear Hub Type: 370 Assembly Width: 130 mm Diameter Axle: 5 mm Sprocket Type: Plug-in Shimano/ SRAM 11-speed cassette Features: Sealed Rims System: Hollow chamber Internal width: 18 mm Profile Height: Low (

• 
  £242.63

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTH173503F Bike Parts, Standard, 27.5 inch x 35 mm front

  #W0H1700BHIXSA00790

  DT Swiss H 1700 Hybrid wheel, 35 mm rim, 15 x 110 m boost axle, 27. 5 inch front The H1700 Spline 30 makes for a mountain bike thats fun to ride uphill and downhill. Thanks to its unsurpassed know-how in the manufacture of wheel components and industry-leading testing procedures, DT Swiss is able to specify its wheels in such a way that they are precisely matched to the area of application. And that is exactly what the developers at DT Swiss have done with this wheel. Your job is just to ride up and down the mountainsHYBRID hubsHybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke mounts. They are also equipped with new 24T hardened steel ratchets, oversized bearings and steel rotors. Thanks to these clever optimisations, DT Swiss achieves a permissible system weight of 150 kg with only minimal weight increase compared to a standard MTB hub. The result is a jewel of a hub that can cope with the highest torques, offers direct drive and combined with the other HYBRID components results in extremely robust wheels. 24t RatchetsHardened 24T steel Ratchets ensure ultimate durability, have a small contact angle and thus guarantee a crisp riding feel. Oversized bearingsAll ball bearings in the hubs are oversized to withstand the high loads and to run perfectly under the toughest conditions. Steel rotorsTo cope with the high torques generated by modern eMTB drives, all hybrid freewheel bodies are made of steel. Available in both Shimano and SRAM XD versions, they are an extremely durable receptacle for any cassette. HYBRID spokesTo complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fit perfectly with the oversized hub spoke receptacles. The specially designed spokes have reinforced and oversized straight.

• 
  £462.66

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTHX153503R Bike Parts, Standard, 27.5 inch x 35 mm rear

  #WHDTHX153503R

  DT Swiss HX 1501 Hybrid wheel, 35 mm rim, 12 x 148 mm boost axle, 27. 5 inch rear A mountain bike must be fun uphill and downhill. This is exactly what you get with the HX 1501 SPLINE One. Since eMTBs allow the rider to pack many mountains into one exit, reliability and weight is critical. The HX 1501 SPLINE One meets both requirements. Thanks to its unsurpassed know-how in the manufacture of wheel components and industry-leading testing procedures, DT Swiss is able to specify its wheels in such a way that they are precisely matched to the area of application. Your job is to just to ride up and down the mountains. HYBRID hubsHybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke mounts. They are also equipped with new 24T hardened steel ratchets, oversized bearings and steel rotors. Thanks to these clever optimisations, DT Swiss achieves a permissible system weight of 150 kg with only minimal weight increase compared to a standard MTB hub. The result is a jewel of a hub that can cope with the highest torques, offers direct drive and combined with the other HYBRID components results in extremely robust wheels. 24t ratchetsHardened 24T steel ratchets provide ultimate durability, have a small contact angle and thus guarantee a crisp riding feel. Oversized bearingsAll ball bearings in the hubs are oversized to withstand the high loads and to run perfectly under the hardest conditions. Steel rotorsTo cope with the high torques generated by modern eMTB drives, all hybrid freewheel bodies are made of steel. Available in both Shimano and SRAM XD versions, they are an extremely durable receptacle for any cassette. HYBRID spokesTo complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fit perfectly with the.

• 
  £355.47

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTH173503R Bike Parts, Standard, 27.5 inch x 35 mm rear

  #WHDTH173503R

  DT Swiss H 1700 Hybrid wheel, 35 mm rim, 12 x 148 mm boost axle, 27. 5 inch rear A mountain bike has to be fun for both climbing and downhill. The H 1700 SPLINE 30 is the perfect wheel for both purposes. Since eMTBs allow the driver to pack many mountains into one ride, reliability is critical. Weight is also a concern, because mountain biking should be fun. The H 1700 SPLINE 30 meets both requirements. Thanks to the unbeatable know-how in the construction of wheel components and industry-leading testing techniques, the DT Swiss are in a position to tailor their wheels to extremely precise purposes. And this is exactly what the developers at DT Swiss have done with this wheel. All you have to do it ride. HYBRID HubsHybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke holders. In addition, they are equipped with new 24T ratchets made of hardened steel as well as oversized bearings and steel rotors. Thanks to these clever features, DT Swiss achieves a permissible maximum system weight of 150 kg with only minimal weight gain compared to a standard MTB hub. The result is a jewel of a hub that can handle the highest torques, offers direct propulsion and, combined with the other HYBRID components, results in extremely robust wheels. 24T RatchetsHardened 24T steel ratchets ensure ultimate durability, have a small pressure angle and thus guarantee a crisp ride feel. OVERSIZED BEARINGSAll ball bearings in the hubs are oversized to withstand the high loads and run perfectly under the toughest conditions. STEEL ROTORSTo cope with the high torques generated by modern eMTB drives, all hybrid freewheel bodies are made of steel. Available in both Shimano and SRAM XD versions, they are an extremely durable mounting point for any cassette. HYBRID spokesTo complete the hybrid system, DT.

• 
  £222.39

  DT Swiss Mountain Bike Wheels

  M 1700 Spline CL 110 / 15mm TA Boost 25mm 27, 5" black 2019 mountain bike wheels 26

  #W0M1700BGIXSA05105

  Disc Recording: Center Lock, Rim width: 25/30 mm (inside/outside), Weight: approx. 807 g, Axle system: 15x110 mm thru axle DT Swiss is a Swiss manufacturer of high-quality bicycle components for all aspects of wheels. Today's DT Swiss AG emerged in 1994 from the spoke manufacturing division of what was then a wire factory. DT Swiss products are very popular worldwide - whether with amateur athletes or in the professional sector. New innovations are constantly being driven forward through a permanent exchange with racing. The combination of passion and determination paired with the typically Swiss precision leads to constantly new products of the highest quality, which meet every demand

• 
  £363.17

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTHX153002F Bike Parts, Standard, 29 inch x 30 mm front

  #WHDTHX153002F

  DT Swiss HX 1501 Hybrid wheel, 30 mm rim, 15 x 110 mm BOOST axle, 29 inch front The HX 1501 SPLINE One makes for a mountain bike thats fun to ride uphill and downhill. Thanks to its unsurpassed know-how in the manufacture of wheel components and industry-leading testing procedures, DT Swiss is able to specify its wheels in such a way that they are precisely matched to the area of application. And that is exactly what the developers at DT Swiss have done with this wheel. Your job is just to ride up and down the mountains. HYBRID hubsHybrid hubs have oversized housings with increased wall thickness, are equipped with heavy duty axles and have extra reinforced spoke mounts. They are also equipped with new 24T hardened steel ratchets, oversized bearings and steel rotors. Thanks to these clever optimisations, DT Swiss achieves a permissible system weight of 150 kg with only minimal weight increase compared to a standard MTB hub. The result is a jewel of a hub that can cope with the highest torques, offers direct drive and combined with the other HYBRID components results in extremely robust wheels. Oversized bearingsAll ball bearings in the hubs are oversized to withstand both the high loads and to run perfectly under the hardest conditions. HYBRID spokesTo complete the hybrid system, DT Swiss needed spokes that could not only withstand the higher weight and torque of a modern eMTB, but also fit perfectly to the oversized hub spoke mounts. The specially designed spokes have reinforced and oversized straight pull spoke heads, which together with the DT Pro Lock Squorx nipples ensure that all the power you transmit to the hubs is also converted into a forward movement. Disregarded by many, specifically developed by DT Swiss: Hybrid spokes made for this new way of cycling. HYBRID rimsMass height meters in rough terrain on the eMTB mean a very hard life for the.

• 
  £215.31

  DT Swiss Mountain Bike Wheels

  X 1700 Spline Front Wheel CL 110 / 15mm TA Boost 22, 5mm 27, 5" 2020 mountain bike wheels 26

  #W0X1700BGIXSA05079

  Disc Recording: Center Lock, Rim width: 22. 5/27 mm (inside/outside), Weight: approx. 766 g, Axle system: 15x110 mm thru axle A modern rim with a wide profile made of extremely hard alloy, anodised and milled SPLINE straight pull hubs and legendary Ratchet System freewheel system means you ave no more excuses. The X 1700 SPLINE 22. 5 also leaves you enough money in your account to register for the next marathon. Construction: Front Axle system: Front wheel 15x110 mm Axle standard: Thru axle Additional Information: - ASTM Classification: 2 Intended use: MTB Front Hub Axle Diameter Front (mm): 15 mm Installation Width (mm): 110 mm Features: For thru axle Rims Size (In Inches): 27. 5 Inch ETRTO (Width x Diameter): 22. 5 - 584 mm Tire type: Wire/clincher Internal width: 22. 5 mm Profile Height: Low (

• 
  £879.12

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTERC1101F Bike Parts, Standard, Front-47 mm Carbon Clincher

  #WHDTERC1101F

  DT Swiss ERC 1100 DICUT disc brake wheel, carbon clincher 47 x 19 mm, front Whatever road you choose: The ERC 1100 DICUT always delivers the best performance. The Aero+ concept developed with DT SWiss's partner SWISS SIDE generates maximum speed and unsurpassed riding characteristics. The core elements of this outstanding wheel are its innovative components, which are assembled with every detail in mind. From now on there are no more excuses, just more reasons to go out and ride wherever the road takes you. TUBELESS technologyTubeless tyres offer some decisive advantages over the conventional combination of tyre and tube. Straightpull technologyStraightpull stands for straight, uncranked spokes. Thanks to this technology, it is possible to achieve an ideal ratio between weight and stability. The Straightpull spokes allow very precise alignment and optimized positioning in the wheel for a stiffer and more responsive wheel. Straightpull hub technologyStraightpull hubs are designed for straight, uncranked spokes. They are extremely durable, reliable and convertible to almost all axle standards. DICUT technologyFrom the highly developed, heat dissipating carbon rims to the asymmetrical aluminium rims made in Switzerland, DICUT wheels are high end. Straight pull injection and exhausted hub technology represent the state of the art. BladedThe central part of the spoke is flat forged for better aerodynamics. A combination of butted and bladed is possible to meet even higher demands on strength and weight saving. Double ButtedThese spokes have two different diameters. The spoke is partially butted by cold forging. This reduces the diameter and thus enables weight reduction while simultaneously improving the elongation values. RWSFastening system patented by DT Swiss. Rigid, safe, and easier to operate than a quick release. 100% disc brake capability. No special.

• 
  £275.31

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTBR2201R Bike Parts, Standard, 26 inches

  #WHDTBR2201R

  DT Swiss BR 2250 wheel, 76 mm rim, 25 x 197 mm Axle, 26 inch rear Large tyres and wide rims usually mean more weight on the wheel. Not so with the BR 2250. It offers the grip of the extra wide slippers with almost conventional wheel weight and thus makes every Fatbike the ultimate fun machine!Technologies:Classic Technology:The CLASSIC wheel line offers the performance you expect from DT Swiss wheels. It is constantly evolving thanks to ever lighter and more efficient materials and Swiss engineering. Thanks to easy maintenance and worldwide availability of spare parts, CLASSIC impellers are a safe value. From the exclusive XC Competition Wheel XRC 950 T to the Freeride Wheel FR 1950, the CLASSIC wheel line offers something for almost every cyclist. Hub technology:DT Swiss hubs rightly enjoy a legendary reputation. Several unique features have contributed to this: The Ratchet System freewheel technology is extremely durable, reliable and can be serviced within a few minutes without tools thanks to the plugged assembly of the hubs. Thanks to the same plug-in system, many hubs can be converted to most axle standards to fit any bike. The non-contact sealing system and the high-precision assembly guarantee the best running characteristics so that the driver's energy is exclusively converted into propulsion. The consistent weight optimisation emphasises the racing genes of this classic. DT Pro Lock technologyThe screw locking system injected into the nipples enables the construction of extremely durable wheels. DT Pro Lock nipple prevents the independent loosening of the spoke-nipple binding. The integrated, patented screw locking system in the nipple thread is based on a two-component adhesive. As soon as the nipples are screwed in, an adhesive is activated which cures completely at room temperature after approx. 6 - 7 hours. If necessary,.

• 
  £287.95

  DT Swiss Mountain Bike Wheels

  X 1700 Spline CL 142 / 12mm TA 22, 5mm 27, 5" black 2019 mountain bike wheels 26

  #W0X1700NGDLSA05080

  Disc Recording: Center Lock, Rim width: 22. 5/27 mm (inside/outside), Weight: approx. 895 g, Axle system: 12x142 mm thru axle DT Swiss is a Swiss manufacturer of high-quality bicycle components for all aspects of wheels. Today's DT Swiss AG emerged in 1994 from the spoke manufacturing division of what was then a wire factory. DT Swiss products are very popular worldwide - whether with amateur athletes or in the professional sector. New innovations are constantly being driven forward through a permanent exchange with racing. The combination of passion and determination paired with the typically Swiss precision leads to constantly new products of the highest quality, which meet every demand

• 
  £1,222.32

  DT Swiss Mountain Bike Wheels

  Unisex's WHDTERC1101R Bike Parts, Standard, Rear-47 mm Carbon Clincher

  #WHDTERC1101R

  DT Swiss ERC 1100 DICUT disc brake wheel, carbon clincher 47 x 19 mm, rear Whatever road you choose: The ERC 1100 DICUT always delivers the best performance. The Aero+ concept developed with DT SWiss's partner SWISS SIDE generates maximum speed and unsurpassed riding characteristics. The core elements of this outstanding wheel are its innovative components, which are assembled with every detail in mind. From now on there are no more excuses, just more reasons to go out and ride wherever the road takes you. TUBELESS technologyTubeless tyres offer some decisive advantages over the conventional combination of tyre and tube. Straightpull technologyStraightpull stands for straight, uncranked spokes. Thanks to this technology, it is possible to achieve an ideal ratio between weight and stability. The Straightpull spokes allow very precise alignment and optimized positioning in the wheel for a stiffer and more responsive wheel. Straightpull hub technologyStraightpull hubs are designed for straight, uncranked spokes. They are extremely durable, reliable and convertible to almost all axle standards. DICUT technologyFrom the highly developed, heat dissipating carbon rims to the asymmetrical aluminium rims made in Switzerland, DICUT wheels are high end. Straight pull injection and exhausted hub technology represent the state of the art. BladedThe central part of the spoke is flat forged for better aerodynamics. A combination of butted and bladed is possible to meet even higher demands on strength and weight saving. Double ButtedThese spokes have two different diameters. The spoke is partially butted by cold forging. This reduces the diameter and thus enables weight reduction while simultaneously improving the elongation values. RWSFastening system patented by DT Swiss. Rigid, safe, and easier to operate than a quick release. 100% disc brake capability. No special.

• 
  £273.07

  DT Swiss Mountain Bike Wheels

  RR 21 Dicut Disc Brake 28" Front Wheel Alu 100 / 12mm black 2018 mountain bike wheels 26

  #WHDTRR2102F

  A direct product of DT's close work with IAM cycling's R&D division and forged in the white heat of the UCI grand tours the RRC 65's are the pinnacle of road racing wheel technology, Custom DICUT hubs give the widest possible flange spacing for cornering stiffness and provide a rock solid anchor point for the unique DT Nail Head spokes, The rim is a custom design unique to DT Swiss and designed specifically for the RRC platform, 24. 8 mm external diameter gives superior mounting for wider tyres and 65 mm depth gives an optimal combination of low weight, crosswind stability and aerodynamic performance, The braking surface is infused with a heat resistant resin that gives braking performance far beyond even the stringent German DIN standard when used in conjunction with the supplied brake pads, SINC ceramic bearings come as standard, these are designed from the ground up to align perfectly with DT Swiss hubs and offer unparalleled smoothness with real world all conditions reliability DT Swiss RR 21 DICUT disc brake wheel, aluminium clincher 21 mm, front black

• 
  £210.69

  DT Swiss Mountain Bike Wheels

  X 1700 Spline CL 100 / 15mm TA 22, 5mm 27, 5" black 2019 mountain bike wheels 26

  #W0X1700AGIXSA05078

  Disc Recording: Center Lock, Rim width: 22. 5/27 mm (inside/outside), Weight: approx. 761 g, Axle system: 15x100 mm thru axle Construction: Front Additional Information: - ASTM Classification: 2 Intended use: MTB Axle system: Front wheel: 15x100 mm Axle standard: Thru axle Front Hub With thru axle Installation Width (mm): 100 mm Ball Bearing Sealed Axle Diameter Front (mm): 15 mm Rims System: Hollow chamber Braking system: Disc brake Size (In Inches): 27,5 Inch Width: 27 mm ETRTO (Width x Diameter): 22. 5 - 584 mm Profile Height: Low (